Belkin OmniView F1DP116S Manual de usuario descargar pdf (Pagina 41)

P75598- Belkin OmniView Serial Console

4.3 Serial-to-Serial Function

The Serial-to-Serial function allows you to use a simple terminal device (video display and

keyboard) to access and control any device connected to the Serial Console on ports 1

through 15. You may also use an external Terminal Converter like the Belkin F1D084E, to

connect your Serial Console to a KVM switch and consolidate the control

4.3.1 Installation

To install, connect our terminal device to port 16 of the Serial console. This will allow you

access to serial device connected to ports 1 through 15 only.

4.3.2

Enable and Configure Serial-to-Serial

To configure the Serial-to-Serial function

1. Enter VT100 console mode (see the section VT-100 for details) to show up the

window screen as below.

2. Go to the item Serial-to-Serial port operation, hit SPACE bar to select ENABLE.

Confirm the change to auto-reboot the system

4. After the reboot (will take about a minute), the screen below will appear. Configure

each configuration setting. Note that one should type in the value for Inactivity

41 / 66

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 65 66

Sin comentarios

Belkin OmniView F1DP116S Manual de usuario Pagina 41