Belkin High Speed ADSL2+ Modem Manual de usuario descargar pdf (Pagina 7)

1110

Setting up your Computer

section

Manually Configuring Network Adapters in Mac OS up to

9.x

In order for your computer to properly communicate with your Modem-

Router, you will need to change your Mac computer’s TCP/IP settings

to DHCP.

1. Pull down the Apple menu. Select “Control Panels” and select

“TCP/IP”.

2. You will see the TCP/IP control panel. Select “Ethernet Built-In”

or “Ethernet” in the “Connect via:” drop-down menu.

3. Next to “Configure”, if not already set, choose “Using DHCP

Server”. This will tell the computer to obtain an IP address from

the Modem-Router.

Manually Configuring Network Adapters in Mac OS X

1. Click on the “System Preferences” icon.

2. Select “Network” from the “System Preferences” menu.

3. Select “Built-in Ethernet” next to “Show” in the Network menu.

4. Select the “TCP/IP” tab. next to “Configure”, you should see

“Manually” or “Using DHCP”. If you do not, check the PPPoE tab

to make sure that “Connect using PPPoE” is NOT selected.

5. If not already selected, select “Using DHCP” next to “Configure”,

then click “Apply Now”.

Your network adapter(s) are now configured for use with the Modem-

Router.

Recommended Web Browser Settings

In most cases, you will not need to make any changes to your web

browser’s settings. If you are having trouble accessing the Internet or

the advanced web-based user interface, then change your browser’s

settings to the recommended settings in this section.

Internet Explorer 4.0 or Higher

1. Start your web browser. Select “Tools” then “Internet Options”.

2. In the “Internet Options” screen, there are three selections:

“Never dial a connection”, “Dial whenever a network connection

is not present”, and “Always dial my default connection”. If you

can make a selection, select “Never dial a connection”. If you

cannot make a selection, go to the next step.

3. Under the “Internet Options” screen, click on “Connections” and

select “LAN Settings...”.

4. Make sure there

are no check marks

next to any of the

displayed options:

“Automatically

detect settings”,

“Use automatic

configuration

script”, and “Use a

proxy server”. Click

“OK”. Then click

“OK” again in the

“Internet Options”

page.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comentarios a estos manuales

Sin comentarios

Belkin High Speed ADSL2+ Modem Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Belkin High Speed ADSL2+ Modem