Belkin ADSL Modem with Wireless 802.11g Router Instrucciones de operaciones Pagina 181

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 180
DG834G Reference Manual
NETGEAR VPN Configuration C-7
v3.0, September 2005
3.
Test the VPN tunnel by pinging the remote network from a PC attached to the DG834G.
a. Open the command prompt (Start -> Run -> cmd)
b. ping 172.23.9.1
Figure C-4: ping 172.23.9.1
Note: The pings may fail the first time. If this happens, try the pings a second time.
DG834G with FQDN to FVL328
This appendix is a case study on how to configure a VPN tunnel from a NETGEAR DG834G to a
FVL328 using a Fully Qualified Domain Name (FQDN) to resolve the public address of one or
both routers. This case study follows the VPN Consortium interoperability profile guidelines
(found at http://www.vpnc.org/InteropProfiles/Interop-01.html).
Configuration Profile
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Vista de pagina 180
1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 203 204

Comentarios a estos manuales

Sin comentarios