Belkin F5D7130 - Wireless G Access Point Manual de usuario descargar pdf (Pagina 19)

section

In order to access the Web-based User interface, you must first set

your computer to the same IP address range as your Wireless G Range

Extender/Access Point.

Windows 98SE, Me, 2000, and XP

Go to the Windows Control Panel and double-click on the Network

icon or the Network Connections icon.

2. Right-click on the Local Area Connection for your wireless adapter

and select “Properties”.

3. In the General tab, select the Internet Protocol TCP/IP settings for

your wireless adapter and click on the Properties button.

4. Select the “Use the following IP address” radio button.

5. Enter an IP address in the same subnet as the access point (for

example, 192.168.2.200).

6. Enter the following subnet mask: 255.255.255.0 then click “OK”.

Note: Once you have completed configuring your WRE/AP, repeat steps

1 through 3. Then select “Obtain an IP automatically” or set a valid IP for

your computer on the same subnet as the network you are connecting to.

Using the Web-Based User Interface

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 56 57

Sin comentarios

Belkin F5D7130 - Wireless G Access Point Manual de usuario Pagina 19