Belkin F1UP0301 Guía para resolver problemas descargar pdf (Pagina 9)

PRINTER SETUP PROCEDURES

AARP Foundation Tax-Aide October 2, 2014 Page 9 of 18

After installation, the host name and current IP address of the printer can be obtained from

the configuration page obtained by pressing the red “X” button on the printer until a page

starts to print. The other computers are setup up by starting Internet Explorer, going to the

host name and running the setup routine from the “Smart Setup” tab on the menu that is

displayed. [If you have trouble connecting to the printer with its host name, use the current

IP address from the configuration page]. The Smart Setup procedure is exactly the same

as the USB installation, except that it will automatically set the workstations up in wireless

printing mode.

If the printer can’t be found on the network, the printer can be set up with a static IP

address. This can be setup in the printer configuration menu and in the computer driver

software. The router will have to be configured for this option, as well. You may need the

network manager at the host site to assist in this setup. See the printer and router manuals

for instructions.

This completes the installation procedures for the HP LaserJet 1102W

Brother HL-2270DW Wireless Network Printer Setup

PURPOSE:

This section provides easy installation instructions for the HL-2270DW. There are

several ways to install this printer. This document sets up the printer using a USB or

network patch cable for initial setup of the printer as a wireless printer.

The purpose of this section is to condense the User Guide instructions to an easily

accomplished, step-by-step procedure. If you are going to use a different connection,

e.g., wired or shared, then you should use the User’s Guide, instead.

Similarly, if you have trouble executing this procedure or it fails, you need to refer to the

User’s Guide. However, if you complete each step in this document, you should have no

trouble.

WHAT YOU WILL NEED

 Printer DVD

 USB cable OR network patch cable [see note, below]

 Blank paper in the printer

NOTE ON CABLES: Cables are not included with the printer. You will have to provide

your own. The best option is to use a USB cable, but that cable may not be available at all

sites. Thus, a patch cable may be the only choice.

PRELIMINARY SETUP

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Sin comentarios

Belkin F1UP0301 Guía para resolver problemas Pagina 9