Belkin Range Extender/ Access Point Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 57
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
45
Troubleshooting
45
1
2
3
4
5
6
7
section
Troubleshooting
Problem:
How do I extend the range of my wireless network?
Solution:
Belkin recommends using one of the following products to extend
wireless network coverage throughout large homes or offices:
The WURE can double the coverage area of your wireless network.
The WURE is typically placed in the area not currently covered
by your wireless router, and connected to the router using either
an Ethernet cable, or through your homes power lines using two
Powerline Ethernet adapters.
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP)
security on a Belkin Router (or Belkin Access Point).
Solution:
1. Log into your Wireless Router (or Access Point). Open your
web browser and type in the IP address of the Wireless Router
(or Access Point). (The Routers default is 192.168.2.1 and the
802.11g Access Points default is 192.168.2.254 ). Log into your
Router by clicking on the Login button in the top, right-hand
corner of the screen. You will be asked to enter your password.
If you never set a password, leave the password field blank and
click Submit.
Click the Wireless tab on the left of your screen. Select the
Encryption or Security tab to get to the security settings page.
2. Select 128-bit WEP from the drop-down menu.
3. After selecting your WEP encryption mode, you can type in
your hex WEP key manually, or you can type in a passphrase
in the Passphrase field and click Generate to create a WEP
key from the passphrase. Click Apply Changes to finish. You
must now set all of your clients to match these settings. A hex
(hexadecimal) key is a combination of numbers and letters
from AF and 09. For 128-bit WEP, you need to enter 26 hex
characters.
For example:
C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 56 57

Comentarios a estos manuales

Sin comentarios