Belkin Range Extender/ Access Point Manual de usuario descargar pdf (Pagina 46)

Troubleshooting

section

Troubleshooting

No, my network name is not listed - go to the troubleshooting

solution titled “I can’t connect to the Internet wirelessly, and my

network name is not listed”

Problem:

I can’t connect to the Internet wirelessly, but my network name is

listed.

Solution:

If the name of your network is listed in the “Available Networks” list,

please follow the steps below to connect wirelessly:

1. Click on the correct network name in the “Available Networks” list.

2. If the network has security (encryption) enabled, you will need to

enter the network key.

3. Within a few seconds, the tray icon in the lower left-hand

corner of your screen should turn green, indicating a successful

connection to the network.

Problem:

I can’t connect to the Internet wirelessly, and my network name is

not listed.

Solution:

If the correct network name is not listed under “Available Networks”

in the wireless utility, please attempt the following troubleshooting

steps:

1. Temporarily move computer, if possible, from five to 10 feet

away from the router. Close the wireless utility, and reopen

it. If the correct network name now appears under “Available

Networks”, you may have a range or interference problem.

Please see the suggestions discussed in the section titled

“Placement of your Wireless Networking Hardware for Optimal

Performance” in this User Manual.

2. Using a computer that is connected to the router via a network

cable (as opposed to wirelessly), ensure that “Broadcast

SSID” is enabled. This setting is found on the router’s wireless

“Channel and SSID” configuration page. If you are still unable to

access the Internet after completing these steps, please contact

Belkin Technical Support.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 56 57

Sin comentarios

Belkin Range Extender/ Access Point Manual de usuario Pagina 46