Belkin N1 Wireless Modem Router F5D8631-4 Manual de usuario descargar pdf (Pagina 87)

EN-86EN-85

Troubleshooting

EN-86EN-85

Troubleshooting

I can’t connect to the Internet wirelessly, but my network name

is listed.

If the name of your network is listed in the “Available Networks” list,

please follow the steps below to connect wirelessly:

1. Click on the correct network name in the “Available

Networks” list.

2. If the network has security (encryption) enabled, you will need to

enter the network key. For more information regarding security, see

the section entitled “Changing the Wireless

Security Settings”.

3. Within a few seconds, the tray icon in the lower, left-hand corner

of your screen should turn green, indication of a successful

connection to the network.

I can’t connect to the Internet wirelessly, and my network name

is not listed.

If the correct network name is not listed under “Available Networks” in

the wireless utility, please attempt the following troubleshooting steps:

1. Temporarily move computer, if possible, five to 10 feet from the

Modem Router. Close the wireless utility, and reopen it. If the

correct network name now appears under “Available Networks”,

you may have a range or interference problem. Please see the

suggestions discussed in the section titled “Placement of your N1

Wireless Modem Router” of this User Manual.

2. Using a computer that is connected to the Modem Router via a

network cable (as opposed to wirelessly), ensure that “Broadcast

SSID” is enabled. This setting is found on the Modem Router’s

wireless “Channel and SSID” configuration page.

If you are still unable to access the Internet after completing these

steps, please contact Belkin Technical Support.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 101 102

Sin comentarios

Belkin N1 Wireless Modem Router F5D8631-4 Manual de usuario Pagina 87