Belkin F5D7330 Manual de usuario descargar pdf

F5D7330 Setup Guide

Infrastructure

Connect the device to a computers network card. Crossover or patch cables both work.

If the user wants to connect wirelessly to a router without any encryption then leave

everything at defaults. It will automatically detect the wireless network and join it.

If the network is encrypted then either use the set-up CD or go directly into the built in web

interface (IP address =192.168.2.225)

In order to connect to the device we can use the Set-up software, which is on the CD. The

idea is that it will find the connected device and show you the current settings.

Or just ignore the software and configure the unit manually through the web-based interface.

By default the IP address is set to Static (192.168.2.225), so check the IP address of the

computer attached to the Bridge.

All of the adapters

settings will be listed

here.

1 2

F5D7330 Setup Guide Infrastructure Connect the device to a computers network card. Crossover or patch cables both work. If the user wants to

Web Interface, ‘Bridge Settings’ The Network card in the computer attached to the 7330 will receive its IP address from the router. If DHCP is ch

Sin comentarios

Belkin F5D7330 Manual de usuario