Belkin ADSL2+ Modem with Wireless G Router F5D7632uk4A Manual de usuario descargar pdf (Pagina 25)

Manually Configuring your Router

Setting your Connection Type to Modem Only (Disable Internet Sharing)

In this mode, the Router simply acts as a bridge passing packets across the DSL

port. It requires additional software to be installed on your computers in order to

access the Internet.

1. VPI/VCI — Enter your VPI and VCI parameter here. (Assigned by your ISP).

2. Encapsulation — Select LLC or VC MUX. (Assigned by your ISP).

DNS (Domain Name Server) Settings

A “Domain Name Server” is a server located on the Internet that translates

Universal Resource Links (URLs) like “www.belkin.com” to IP addresses. Many

ISPs do not require you to enter this information into the Router. The “Automatic

from ISP” box (1) [Designer: call this out in screenshot below] should be checked

if your ISP did not give you a specific DNS address. If you are using a static

IP connection type, then you may need to enter a specific DNS address and

secondary DNS address for your connection to work properly. If your connection

type is dynamic or PPPoE, it is likely that you do not have to enter a DNS

address.

Leave the “Automatic from ISP” box checked. To enter the DNS address

settings, uncheck the “Automatic from ISP” box and enter your DNS entries

in the spaces provided. Click “Apply Changes” (2) [Designer: call this out in

screenshot below] to save the settings.

(1)

(2)

(1)

(2)

section

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 85 86

Sin comentarios

Belkin ADSL2+ Modem with Wireless G Router F5D7632uk4A Manual de usuario Pagina 25