Belkin Range Extender/ Access Point Guía de usuario descargar pdf (Pagina 5)

Linksys AC1200 Max Wi-Fi Range Extender

Using Wi-Fi Protected Setup

Wi-Fi Protected Setup™ makes it easy to connect your extender to your network,

and connect other devices to your network through the extender.

Wi-Fi Protected Setup light activity

WPS Light Status/ description

Blinking white When WPS connection is in process

Solid white When WPS connection is successful

Blinking amber for two minutes When WPS cannot establish connection

or encounters a problem

Fix: wait a few seconds after LED stops

blinking and try again

Connecting the extender to an existing access point

If your access point or router supports it, you can use Wi-Fi Protected Setup

to connect the range extender to the access point or router. Choose from the

setup methods below to connect the extender.

NOTE

If you have an access point or a router that does not support Wi-Fi Protected

Setup, note the wireless settings, and then manually configure the extender.

Connecting with the Wi-Fi Protected Setup Button

Use this method if your router or access point has a Wi-Fi Protected Setup button.

1. Press the Wi-Fi Protected Setup button on the extender.

2. Click the Wi-Fi Protected Setup button on the router’s Wi-Fi Protected

Setup screen (if available), OR press and hold the Wi-Fi Protected Setup

button on the router for one second. When the connection is complete,

the Wi-Fi Protected Setup light on the extender will be solid.

3. If you used the extender’s Wi-Fi Protected Setup screen, click OK in that

screen within two minutes.

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

Belkin Range Extender/ Access Point Guía de usuario Pagina 5