Belkin F5D52314 - Cable/DSL Gateway Router Manual de usuario descargar pdf (Pagina 20)

Changing the baud rate on the LANCNC-FAD device

The LANCNC-FAD defaults to 38,400 baud. If a different baud rate is desired, verify

that the CNC can support the new baud rate to ensure that the CNC and the LANCNC-

FAD can communicate. To change the LANCNC-FAD device baud rate, an INI file must

be changed that resides on the LANCNC-FAD. Use a PC to create a text file on a SD

card with the file name LANCNC.INI in the root directory. This file must be text only

and have carriage returns at end of each line. To change the baud rate on the LANCNC-

FAD device to 9600 baud, type CNC=9600 in the first line of the LANCNC.INI file. The

LANCNC.INI file must be text only. The current version of LANCNC-FAD has been

tested at 9,600, 38,400, 57,600 and 115,200 baud.

Example how to change the LANCNC-FAD ftp address to 192.1678.2.113 and the baud

rate to 57600:

CNC=57600

BYE=ON

IP address=192.168.2.113

IP mask=255.255.255.0

IP gateway=0.0.0.0

IP dns=0.0.0.0

To complete the baud rate change, cycle power on the LANCNC-FAD. Enter the correct

baud rate on the CNC with the corresponding CD,8 CD,10 or CD,11.

Using the BYE= parameter

The BYE=OFF is for older CNC's that clear the screen after receiving the BYE

command. The BYE command is important because it closes the serial port and allows

the keyboard of the Control to start functioning again. If the BYE is not sent, press the

MANUAL key or the ENTER key to regain keyboard control. Set the BYE=OFF in the

INI file only if the control version clears the screen after a BYE command. Otherwise

keep it at the default of BYE=ON.

Trouble Shooting Guide

Problem: There is no response from the LANCNC-FAD device.

1. Verify the +7 to +30 VDC power supply is plugged into the device.

2. With power applied, at least one LED should be lit on the device indicating

power.

3. The straight through DB25 cable provided should be connected directly into the

machine. Do not use a null modem cable between the LANCNC-FAD device and

the machine.

4. Verify that the machine version supports the baud rate being used. CD,10 is for

38,400 baud machines. CD,8 is for 9600 baud machines. To verify the machine’s

- 20 -

1 2 ... 15 16 17 18 19 20 21 22

Sin comentarios

Belkin F5D52314 - Cable/DSL Gateway Router Manual de usuario Pagina 20